Publicidad
Idiomas disponibles
Idiomas disponibles
FULL VERSION MANUAL
LR600 RC
Art. no 38068
PRODUCT OVERVIEW
The packaging contains the following parts:
•
Lamp unit
•
Headband
•
Extension cord with helmet strap
•
Cable guide (side)
•
Cable guide (rear) with 3M adhesive
•
Rechargeable Li-Ion battery 2.0 Ah
•
USB-C charge cable
•
Helmet bracket with 3M adhesive
•
Bar mount
•
Battery holder (2.0 / 3.5)
•
Quick guide
BEFORE USE
BATTERY CHARGING
The battery needs to be charged before first use.
1. Located on the side of the battery pack is a USB-C connector.
Attach the included USB charge cable to this USB-C connector.
2. Connect the USB connection to a wall outlet, computer or other standard USB connec-
tion.
3. On the battery, there are 4 LEDs showing battery status during charging:
•
Green light (all 4 LEDs) = battery is fully charged
•
Red light blinking = battery is charging
Charge time is approximately 3 hours.
Note! When the battery is fully charged the charger automatically switches to maintenance
mode.
Note! Never leave a battery unattended during charging.
ADJUST THE HEADBAND
The headband is ergonomically shaped to give comfortable fit. Use the 2 buckle adjustments
to fit it perfectly to your head. Attach the headlamp in the head bracket by sliding the head-
lamp foot into the snap-in socket.
To remove, slide the headlamp up and out of the bracket.
BATTERY CARRYING
The ergonomic battery holder keeps the battery in place and improves the comfort when
you carry the battery on your head. You attach the battery holder to the headband and then
easily slide in the battery.
HELMET ATTACHMENT
The helmet bracket + rear cable guide comes with pre-mounted adhesive tape on the back
for easy mounting on any helmet. The adhesive is a polyethylene foam tape developed to not
damage or cause any type of weakness to the plastic in your helmet.
To mount the helmet bracket, remove the protective film covering the adhesive tape. Make
sure the surface of the helmet is clean and dry. Press the bracket onto its correct position.
If you do not want to use the adhesive on your helmet the attachment is prepared for mount-
ing with 2 or more straps on the sides. (Not included)
Attach the headlamp in the helmet bracket by sliding the headlamp bracket into the snap-in
socket. To remove, slide the headlamp up and out of the bracket.
Attach the cable by using the back cable guide or integrated helmet strap.
Depending on helmet type, it might be preferable to use the Helmet mode – Flow light deac-
tivated, when the headlamp is used on a helmet.
The headband is designed to fit on a helmet by detaching the battery holder – thus giving
you the flexibility to use either the included helmet bracket or to just snap the headlamp onto
your helmet and go.
DURING USE
SILVA INTELLIGENT LIGHT AND FLOW LIGHT
SILVA Intelligent Light optimizes the light pattern by the unique combination of a long reach
spot light and a close flood light. Our ingenious SILVA Flow Light takes the optimization even
further by providing seamless tuning of the light pattern. Simply tilting the light downwards
makes the beams wider to brighten up slower activities. When tilting the headlamp upwards,
the light reaches longer to provide perfect vision when you move fast.
SWITCH ON YOUR HEADLAMP
A push button is located on the left side of the headlamp body. This button controls all light
modes.
•
To start the headlamp with Flow Light activated press push button with a short press.
A blue led will be turned on which indicates that the flow light mode is on.
•
To start the headlamp with Flow Light deactivated press and hold push button for 1
second
•
To cycle between the different modes use short presses.
•
To turn the headlamp off press and hold button for 1 second
SHORT PRESS
FLOW LIGHT ACTIVATED
MAX
FLOW LIGHT DEACTIVATED
OFF
DEACTIVATED FLOW LIGHT
Flow Light deactivated means that the Light image will remain unchanged even if the
LONG PRESS
MED
MIN
OFF
OFF
headlamp is tilted up or down. This might be useful when the lamp is mounted on a helmet or
a bike handle bar.
TEMPETRATURE CONTROL:
This headlamp might get hot. The headlamp temperature is depending on light mode, ambi-
ent air temperature and airflow (speed). Make sure to keep it away from children.
Also, make sure it will not get in contact with sensitive or flammable material.
NOTE: Always make sure to disconnect the battery when the lamp is not is use.
Why does the light dim down for no apparent reason?
If the cooling is not sufficient, for instance if used while standing still, indoors or in high
temperatures, then the light will automatically be reduced until acceptable surface tempera-
ture on the lamp body is reached. This means that the lower the ambient temperature, the
stronger the light output.
LOW BATTERY WARNING
During operation of the headlamp there will be a low battery warning when 10% of the bat-
tery energy remains. This is done by flashing both LEDs for 1 second.
RESERVE MODE
During operation, the lamp will go into reserve mode when there is 10% power left of the bat-
tery. All LEDs will flash before the lamp goes into this mode.
Reserve mode can be overridden by pressing the button.
Warning: If you have pressed the button when headlamp is in reserve mode no more low bat-
tery warnings will appear before the headlamp turns OFF.
BATTERY STATUS INDICATION (2.0. AH BATTERY)
When battery is connected and the headlamp is switched on - the current battery status will
automatically be visible for 30 seconds. To check battery status during use, the headlamp
has to be switched OFF and then back ON again.
•
4 green LEDs = Fully charged
•
3 green LEDs = 75% of the battery remains
•
2 green LEDs = 50% of the battery remains
•
1 red LED = 25% of the battery remains
To get as much power as possible out from your battery, keep it away from low temperatures
during use.
AFTER USE
MAINTENANCE
To make sure you get maximum performance from your headlamp, clean it regularly with a
damp cloth. Headband cleaning – rinse in warm water.
TECHNICAL SPECIFICATIONS:
Weight headlamp including headset:
Battery weight:
Battery type:
Light distance Max/Med/Min:
Lumen Max/Med/Min:
Burn time 20˚C Max/Med/Min:
Burn time -5˚C Max/Med/Min:
Reserve mode:
Charging time:
Water resistance:
Operative temperature range:
ABOUT LI-ION BATTERIES
The battery should be stored in a dry environment within the temperature range of
-20°C and +35°C.
If you would like to store your battery for a longer period (more than 30 days) the battery
should not be fully charged. This may cause loss of its characteristics.
Li-ion batteries have a discharge rate of approx. 20% over a 30-day period. You can always
charge a half full battery without damaging its characteristics.
Do not expose the battery for extreme temperatures which may cause fire or explosion.
Do not disassemble or mistreat the battery; risk for chemical burn.
Keep away from children.
Do not dispose of batteries in fire. This may cause an explosion.
Do not submerge the batteries in water.
Do not short circuit the contacts.
Replace only with Silva batteries with the same connector.
PROTECTING THE ENVIRONMENT.
Headlamp, batteries and packaging are recyclable. Please dispose these items at designated
recycling stations.
WARRANTY
Silva warrants that, for a period of two (2) years*, your Silva product will be substantially free
of defects in materials and workmanship under normal use. Silva's liability under this war-
ranty is limited to repairing or replacing the product. This limited warranty extends only to the
original purchaser.
If the Product proves defective during the warranty period please contact the original point
of purchase. Make sure to have your proof of purchase on hand when returning the product.
Returns cannot be processed without the original proof of purchase. This warranty does not
apply if the product has been altered, not been installed, operated, repaired, or maintained in
accordance with instructions supplied by Silva, or has been subjected to abnormal physical
or electrical stress, misuse, negligence or accident. Neither does the warranty cover normal
wear and tear. Silva is not responsible for any consequences, direct or indirect, or damage
resultant from use of this product. In no event will Silva's liability exceed the amount paid by
you for the product. Some jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you. This
warranty is valid and may be processed only in the country of purchase.
* Batteries: one (1) year
For more information please visit www.silvaweden.com
78 g
85 g
Li-ion 7.4 V, 2.0 Ah
140 m/80 m/50 m
600/250/80
5 h/8 h/13 h
2 h 30 min/4 h/10 h
0.5 h
3 h
IPX5
-20 - +60º
Publicidad
