Robust RB-HP 1435 Manual De Instrucciones Original página 17

2.2 Items supplied
Please check that the article is complete as spe-
cifi ed in the scope of delivery. If parts are missing,
please contact our service center or the nearest
branch of the DIY store where you made your
purchase at the latest within 5 work days after
purchasing the article and upon presentation of
a valid bill of purchase. Also, refer to the warranty
table in the warranty provisions at the end of the
operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
3. Proper use
The pressure cleaner is designed to clean ve-
hicles, machines, buildings, facades, etc. in the
private sector.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Anl_RB_HP_1435_SPK7.indb 17 Anl_RB_HP_1435_SPK7.indb 17
GB
Children should be supervised to ensure that they
do not play with the appliance.
4. Technical data
Mains voltage: ............................... 230 V ~ 50 Hz
Power input: ............................................ 2000 W
Rated pressure: .........................9.5 MPa (95 bar)
Permissible pressure: ...... max. 14 MPa (140 bar)
Delivery rate: .............................................6 l/min
Max. water inlet pressure: ...........0.6 MPa (6 bar)
Totally insulated: ...........................................II /
Weight: ..........................................................8 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60335-1.
L sound pressure level ........................ 77 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 94 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60335-1.
Vibration emission value a
K uncertainty = 1.5 m/s
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
- 17 -
≤ 2.5 m/s
2
h
2
03.12.15 10:44 03.12.15 10:44