Publicidad
Idiomas disponibles
Idiomas disponibles
■
Keep work area clean and well lit . Cluttered or
dark areas invite accidents .
This gives you better control of the tool in un
expected situations .
WARNING!
►
Have your power tool serviced by qualified
trained personnel using only original spare
parts . This ensures that the safety of the tool is
maintained .
■
Keep children and other persons away from the
tool during operation . Distractions can cause
you to lose control of the tool .
■
Dress properly . Do not wear loose clothing or
jewellery . Keep your hair, clothing and gloves
away from moving parts . Loose clothes, jewel
lery or long hair can be caught in moving parts .
■
Put the trigger and the tool away in the event of
an unexpected compressor failure .
■
Wherever possible, use a condensate separator
or drain the condensate (water) from the hoses
and tubing regularly before and during the use
of the compressed air tools .
■
CAUTION! An undersized compressed air
system will reduce the efficiency of your tool .
■
Please ensure that you have read and under
stood the safety instructions regarding multiple
hazards before installation, operation, repair,
service and replacement of any accessories
and before working in the vicinity of the auto
matic screwdriver . Otherwise, there is a risk of
serious physical injuries .
■
The automatic screwdriver should only be fitted,
adjusted or used by qualified and trained
operators .
■
The automatic screwdriver may not be modified .
Modifications can reduce the effectiveness of
the safety measures and increase the risks for
the operator .
■
Do not lose the safety instructions – hand them
to the operator .
■
54
│
GB │ MT
■
Never use a damaged power screwdriver .
■
The machines must be serviced regularly to
check whether the rated values and labels
required in the relevant part of ISO 11148 are
marked on the machine in a legible manner .
The employee/user must contact the manufac
turer to obtain replacement labels if necessary .
Hazards caused by flying parts
■
If a workpiece or one of the accessory parts or
even the machine tool itself breaks, parts can
be flung out at high speed .
■
Always wear impactresistant safety goggles
during operation, when replacing accessory
parts or during repair or maintenance work .
The level of the required protection must be
evaluated separately for each individual task .
■
You must ensure that the workpiece has been
securely fixed in place .
■
Check regularly that the rotation speed of the
compressed air tool is not higher than the spec
ified rotation speed marked on the compressed
air tool . These rotation speed tests must be con
ducted without any accessory tools attached .
■
Ensure that sparks and fragments created during
work do not constitute a hazard .
■
Disconnect the compressed air tool from the
compressed air supply before replacing an
attachment or accessory, and before adjusting
a setting, servicing the tool or cleaning the tool .
■
Ensure that other people are not put at risk .
Hazards caused by entanglement
■
Hazards caused by entanglement may result
in suffocation, scalping and/or cuts if loose
clothing, personal jewellery, necklaces, hair or
gloves are not kept away from the machine and
its accessories .
■
Gloves can become caught in the rotating drive,
which can lead to injuries or fractures of the
fingers .
■
Rubber or metalreinforced gloves can easily
become entangled in rotating drive fittings and
extensions .
PDSS 310 B5
Publicidad
