Publicidad
Idiomas disponibles
Idiomas disponibles
OVERVIEW
EN
The GWN7602 is a 802.11ac wireless access point. It offers dual-band
2x2:2 technology and a sophisticated antenna design for ideal network
throughput and Wi-Fi coverage range. Three 100M Ports provide IP
Phones, IPTV, PC and etc. with Ethernet, and an uplink Gigabit net-
work port with PoE/PoE+. To ensure easy installation and management,
the GWN7602 supports to be managed by GWN series APs(except
GWN7602) with embedded controller or GWN.Cloud Management Sys-
tem. With support for advanced QoS, low-latency real-time applications,
up to 80 client devices, combining with the features of Mesh, Captive
Portal, the GWN7602 is an ideal wireless access point for small sized
business, coffee shops, restaurants, and hotel deployments.
PRECAUTIONS
•
Do not attempt to open, disassemble, or modify the device.
•
Do not expose this device to temperatures outside range of 0 °C to
40 °C for operating and -10 °C to 60 °C for storage.
•
Do not expose the GWN7602 to environments outside of the follow-
ing humidity range: 10-90% RH (non-condensing).
•
Do not power cycle your GWN7602 access point during system
boot up or firmware upgrade. You may corrupt firmware images and
cause the unit to malfunction.
PACKAGE CONTENTS
GWN7602 Access point
2x Screws
2x Screws Anchors
(PA3.5*20)
1x Quick Installation
Guide
~1~
GWN7602 PORTS
Port
Description
Power adapter connector.
(DC 12V,2A)
Factory reset pinhole.
Press for 7 seconds to reset factory default settings.
Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
1x 10/100M Ethernet port.
2x 10/100M Ethernet ports with PSE.
Notes:
•
If GWN7602 is powered by POE+ or the optional DC(12 V,2A) PSU
that can be provided. it will support LAN2&LAN3 for PSE.
•
If input is PoE, GWN7602 will only support LAN3 for PSE.
POWERING AND CONNECTING THE GWN7602
The GWN7602 can be powered either using the right PSU (DC12V, 2A)
or using a PoE/PoE+ switch:
Option A:
Power Adapter to AC
outlet.
Option B:
RJ45 Ethernet Cable
to PoE/PoE+ switch.
Note: The max output of each PSE port is 6W
HARDWARE INSTALLATION
GWN7602 can be mounted on the wall. Please refer to the following
steps for the appropriate installation.
~2~
Publicidad
