Descargar Imprimir esta página

Emerio CH-128215.4 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
CH-128215.4
PARTS DESCRIPTION
1.
Air outlet
2.
Power switch (750W; 1250W; 2000W)
3.
Thermostat
4.
Air inlet
5.
Handle
6.
Feet
OPERATION OF THE HEATER
Note: When the heater is turned on for the first time, or when it is turned on after a longer period of storage, it
is normal that the heater may emit some smell and fumes. This will disappear when the heater has been on a
short while.
Set the thermostat to the minimal position and insert the plug to the power supply.
Turn on the power switch: 750W, 1250W, 2000W.
Turn the thermostat knob in a clockwise direction to the max position.
Once the room temperature has reached the desired value, turn the thermostat knob slowly in
anti-clockwise direction until you hear a "click" sound; this is the setting temperature.
The appliance will automatically maintain the setting temperature. It will switch on when the room
temperature is below the setting, and switch off if it is above the setting.
PROTECTION AGAINST OVERHEATING
1) An additional fitted safety thermostat protects the heater against overheating and switches it off
automatically. The indicator light then goes out. The heater is ready for service again after a short cooling-off
phase (approx. 15 minutes).
2) If this repeats itself, first check whether the thermostat switch is set correctly or if objects hinder the heating
operation.
CLEANING THE HEATER
Always unplug the heater from the wall socket and allow it to cool down completely before cleaning. Clean the
outside of the heater by wiping with a damp cloth and with a dry cloth. Do not use any detergents or abrasives
and do not allow any water to penetrate the heater.
STORING THE HEATER
When the heater is not used for a long time it should be protected from dust and stored in a clean dry place.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 1800-2000W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer.
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a
defective product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
- 5 -
EN

Publicidad

loading