Publicidad
STEP 4- ATTACH THE PIPE ASSEMBLY AT THE CEILING PLATE.
Rotate the pipe assembly to
the ceiling plate, assemble the
two parts.
OPTIONAL
The pipe that is attached to the ceiling plate is threaded on both ends and can be used as a female to female coupler.
Remove the pipe from
the ceiling plate
A4
Use the pipe as a female
to female coupler
A3
A1
Allen Key
2.5mm
M5 Set Screw
Allen Key
2.5mm
Adjust the pipe assembly to
the best direction , then tighten
the set screw with the security
allen key
A2
M5 Set Screw
A2
A1
P9
Publicidad
