Power Dynamics PD632BP Manual De Instrucciones página 5

OPERATION

Switch on the receiver with the power switch.

Open the battery cover of bodypack and put
new or full charged battery inside. Press the
power switch on the bodypack for 2 seconds, to
switch on.

Select your transmission channel, with the ▲
and ▼ button on the receiver. Hold the IR
sensor of the bodypack close to the IR sensor
of the receiver. Press shortly on the SET button
of the respective channel to synchronize the
bodypack.

When the receiver and the bodypack have
been set to the same transmission channel, the
RF bargraph on the receiver's display will
indicate that a radio signal is being received.
Noted: how more numbers of bars are
displayed, how better is the reception.

Close the battery cover onto the bodypack again.
For optimum receiving:

Reposition the receiver so there is nothing obstructing a line of sight to the microphones (including the audience).

Avoid placing microphone and receiver where metal or other dense materials may be present.

Place the receiver on the top of the equipment rack.

Remove nearby sources of wireless interference, such as cell phones, two-way radios, computers, media players, Wi-
Fi devices, and digital signal processors.

Charge or replace the microphone battery.

Keep microphones more than two meters (6 feet) from each other.

Keep the microphones and receiver more than 5 meters (16 feet) apart.

During sound check, mark trouble spots and ask presenters or performers to avoid those area.
HEADSET MICROPHONE
Connect the connecter of supplied headset microphone to the
connecting jack of bodypack.
Position the headset microphone approx. 15 mm (1/2 inch) from
the opening of your mouth.
5