Putting The Printer Into Operation; Inserting The Batteries - Microlife PR 1KA1 Instrucciones De Uso

3. PUTTING THE PRINTER INTO OPERATION

3.1. Inserting the batteries

The battery compartment is located on the
underside of the device (Please see
illustration).
a) Remove cover as illustrated.
b) Insert the batteries (4 x size AA),
thereby observing the indicated polarity.
c) If the LED starts flashing, the batteries
are empty and must be replaced.
Attention!
• If the green LED starts flashing, the
device is blocked until the batteries
have been replaced.
• Please use 'AA' Long-Life or Alkaline
1.5V Batteries. Do not use
rechargeable batteries.
• If the printer is left unused for long
periods, please remove the batteries
from the device.
LED flashing
3