TROUBLESHOOTING
The following information may assist in identifying a problem and rectifying it.
Problem
Not work.
Not work.
Working speed can
not reach teh settled
speed.
The display does
not illuminate and
the numbers are not
displayed, but the tape
runs.
STORING
FOLDING
After used, please fold the machine and insert the locking nut.
Cause
Plug is not in socket.
Switch is off.
Voltage is low.
The connector on the inside plate of
the display has been disconnected.
Put the plug in the socket.
Turn on the switch.
Wait until the voltage is normal.
Unscrew the 13 screws from the display
cover and reconnect the cable to the left of
the electronic board.
48
Solution