Dometic GROUP 9105100007 Instrucciones De Uso página 29

BordBar CDF-11
When the cooler reaches the preset temperature, the LED lights up
orange.
✓ The display (fig. 2 5, page 3) switches on and shows the current cooling
temperature.
✓ The cooler starts cooling the interior.
6.7 Setting the temperature
➤ Press the "SET" button (fig. 2 4, page 3) once.
➤ Use the "+" (fig. 2 6, page 3) and "–" (fig. 2 7, page 3) buttons to select
the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is dis-
played again.
6.8 Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit.
This is how to do it:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 2 4, page 3) twice.
➤ Use the "+" (fig. 2 6, page 3) and "–" (fig. 2 7, page 3) buttons to select
Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a few sec-
onds. The display flashes several times before it returns to the current
temperature.
EN
Operation
29