Publicidad
Idiomas disponibles
Idiomas disponibles
dEScRIPTION
2.4
Features
Features
•
Rugged vibration pickup for instrument miking on stage.
•
Frequency response tailored to acoustic guitar, banjo, zither,
and bowed string instrument miking.
•
Complete with adhesive compound for mounting the pickup
directly on the instrument.
2.5
Brief Description
Brief
Description
The C411
III
is a vibration pickup that converts the vibrations of an
instrument's soundboard into an electrical signal.
The C411
III
has been specifically designed for direct attachment to
an acoustic guitar, banjo, zither, or bowed string instrument and
ensures absolutely accurate, coloration-free reproduction.
The supplied adhesive compound for attaching the pickup will
leave wooden, plastic, and metal surfaces untainted.
2.6
Versions
The C 411
is available in two versions:
III
C411
P
III
•
For 9 to 52 V universal phantom power.
(3-m) permanently attached connecting cable with phantom
power adapter with integrated 3-pin XLR connector.
C411
L
III
•
For use with the B23 L battery power supply, MPA V L phan-
tom power adapter, or AKG Wireless bodypack transmitters.
5-ft.
(1.5-m) permanently attached connecting cable with 3-pin
mini XLR connector
22
C411
MANUAL
III
3
Interfacing
The C411
pickup is a condenser transducer and therefore needs
III
a power supply.
Using any power supply other than those recommended by AKG
may damage your pickup and will void the warranty.
3.1
C411
PP
III
3.1.1 Connecting to Balanced Inputs
1
2
MPA
Phantom
2
3
1
Figure 1: Connecting to balanced inputs
1)
Connect the phantom power adapter (1) on the pickup cable
to a balanced XLR microphone input with phantom power.
2)
Switch the phantom power on. (Refer to the instruction manu-
al of the unit to which you connected your pickup.)
3)
If your mixer provides no phantom power: Connect the phan-
tom power adapter (1) to an optional AKG phantom power
supply (2) and use an XLR cable (3) to connect the phantom
power supply to the desired balanced input.
C411
MANUAL
III
INTERFAcINg
C411
PP
III
Connecting
to balanced
inputs
1
MPA
MIC 1
MIC 2
MIC 3
MIC 4
3
2
3
1
23
Publicidad
