Publicidad
Idiomas disponibles
Idiomas disponibles
24
HOW TO USE
OPTIONS
After selecting a cycle, press the Options button to
select additional features for your load.
NOTE:
y To protect your garments, not every feature is
available with every cycle.
y If the START/PAUSE button is not pressed within
60 minutes to start the cycle, the control will shut
off and all settings will be lost.
SOAK
This option provides 30-minutes presoak prior to the
start of the selected cycle. Use the SOAK option to
presoak garments to help remove difficult spots or
stains on fabrics. At the end of the presoak time, the
selected cycle will begin with the same water used
for the soak.
NOTE: You cannot select the SOAK option in the
TUB CLEAN, WATERPROOF, and ALLERGIENE™
cycles or with the STEAM option selected.
STAIN CARE
Use this option for heavily soiled loads that need
improved stain treatment. When Stain Care is se-
lected, the wash cycle will begin with warm water
to help prevent the setting of certain types of stains.
Then, as the cycle progresses, hot water will be add-
ed to gradually increase the water temperature to
help remove stains that require treatment at higher
temperatures.
NOTE:
y Best results are obtained with smaller loads (less
than 6 lbs.)
y If you select STAIN CARE, the COLDWASH op-
tion is not available.
SPIN ONLY
Use this option to drain the water from the tub and
spin out the clothes. This can be used, for example,
if the wash cycle is interrupted by a power failure.
The spin speed can be adjusted by using the SPIN
SPEED button.
1. Press the POWER button to turn on the washer.
2. Press the Options button repeatedly until Spin
Only is selected.
3. Press the Spin button to select the desired spin
speed. Selecting NO SPIN and EXTRA HIGH are
not allowed.
4. Press the START/PAUSE button.
RINSE + SPIN
Select this option to rinse and spin a load separately
from a regular cycle. This can be helpful in prevent-
ing fresh stains from setting in fabrics. You can
change the spin speed by pressing the SPIN SPEED
button.
1. Press the POWER button to turn on the washer.
2. Press the Options button until the Rinse+Spin indi-
cator light is lit. (The cycle light will turn off.)
3. Press the START/PAUSE button to start the cycle.
SPECIAL DRAIN FEATURE
This washer is equipped with a special feature that
is designed to make your washer as safe as pos-
sible. If the washer is paused or shut off while there
is still water in the tub, the water will drain automati-
cally after several minutes of inactivity. This helps
keep children safe by reducing the possibility of wa-
ter remaining in the tub.
Any water remaining in the tub will automatically
drain 4 minutes after the washer has shut off. If the
washer is paused and the START/PAUSE button is
not pressed within 60 minutes, the washer will shut
off and all cycle settings will be lost. And any water
remaining in the tub will be drained.
The washer can be turned on or restarted any time
before the drain begins. However, once the washer
begins to drain, all controls and functions will be dis-
abled until the water has been completely drained
and the washer shuts off.
Publicidad
