Bosch HEAVY DUTY GLI 18V-4000 C Professional Manual Original página 14

14 | Français
Maintenance and Service
Maintenance and Cleaning
Remove the batteries from the worklight before carry-
u
ing out any work on the worklight (e.g. assembly,
maintenance, etc.) as well as when transporting and
storing the worklight. There is risk of injury from unin-
tentionally pressing the on/off switch.
The cordless worklight is maintenance-free and does not
contain any parts that need to be replaced or maintained.
To avoid damage, clean the glass on the cordless worklight
with a dry, soft cloth only. Do not use any detergents or
solvents.
If the button cell has fully discharged, replace it with a new
one.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
1 609 92A 7NL | (17.05.2022)
Disposal
Cordless worklights, battery packs, accessor-
ies and packaging should be sorted for environ-
mentally friendly recycling.
Do not dispose of cordless worklights and bat-
tery packs/batteries with household waste.
Only for EU countries:
According to the Directive 2012/19/EU on waste electrical
and electronic equipment and its transposition into national
law, cordless worklights that are no longer usable, and, ac-
cording to the Directive 2006/66/EC, defective or drained
batteries must be collected separately and disposed of in an
environmentally correct manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113) and the Waste Batteries and
Accumulators Regulations 2009 (2009/890), cordless
worklights that are no longer usable must be collected separ-
ately and disposed of in an environmentally friendly manner.
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see
"Transport", page 14).
Français
Consignes de sécurité pour les
lampes sans-fil
Lisez attentivement toutes les instructions
et consignes de sécurité. Le non-respect des
instructions et consignes de sécurité peut pro-
voquer un choc électrique, un incendie et/ou
entraîner de graves blessures.
Conservez tous les avertissements et toutes les instruc-
tions pour pouvoir s'y reporter ultérieurement.
Lisez attentivement toutes les consignes de sécurité et
u
toutes les instructions qui ont été fournies avec l'accu ou
l'outil électroportatif qui l'accompagne.
Manipulez la lampe sans-fil avec soin et précaution. La
u
lampe sans-fil génère une forte chaleur susceptible de
provoquer un incendie ou une explosion.
N'utilisez pas la lampe sans-fil dans un environnement
u
explosif.
Bosch Power Tools