Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TECHNICAL DATA
Parameter description
Parameter value
DIAMOND
Product name
DRILLING MACHINE
MSW-
MSW-
MSW-
DDM
Model
DDM
DDM
205
260
300
P24
Rated voltage [V~]/
230/50
Frequency [Hz]
Rated power [W]
4000
2400
2800
Current [A]
19
11
12
Core drill attachment
1 ¼
diameter ["]
920/
No-load speed [r/min]
750
750
500
Maximum drilling
ɸ260
ɸ205
ɸ300
diameter [mm]
Drilling path [mm]
500
370
465
Water inlet valve
ɸ16
diameter [mm]
Acoustic power level L
103,74;
109,2;
110,4;
WA
[dB(A)]
K=3
K=3
K=3
Acoustic pressure level
89,1;
96,2;
97,4;
L
[dB(A)]
K=3
K=3
K=3
PA
400
360
390
Dimensions [mm]
x340
x340
x375
x1030
x840
x903
Weight [kg]
24,5
30,2
30,2
DIAMOND
Product name
DRILLING MACHINE
MSW-DDM
MSW-DDM
Model
255 G28
255 G26
Rated voltage [V~]/
230/50
Frequency [Hz]
Rated power [W]
2800
Current [A]
12
Core drill attachment
1 ¼
diameter ["]
No-load speed [r/min]
500/920
Maximum drilling
ɸ 255
diameter [mm]
Drilling path [mm]
580
Water inlet valve
ɸ16
diameter [mm]
Acoustic power level L
110,4; K=3
WA
[dB(A)]
10
U S E R M A N U A L
Acoustic pressure level
97,4; K=3
L
[dB(A)]
PA
Dimensions [mm]
510x450x1160
Weight [kg]
30,2
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The operation manual must be read carefully.
Never dispose of electrical equipment together
with household waste.
This machine conforms to CE declarations.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Safety goggles must be used.
Ear protection must be used.
Safety mask must be used.
Protective footwear must be used.
Attention! Wear protective gloves.
Wear a face shield.
ATTENTION! Electric shock warning!
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
Rev. 22.04.2022
The terms "device" or "product" are used in the warnings
and instructions to refer to DIAMOND DRILLING MACHINE.
2.1. ELECTRICAL SAFETY
a)
The plug must fit the socket. Do not modify the plug
in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an increased
risk of electric shock if the earthed device is exposed
to rain, comes into direct contact with a wet surface
and
or is operating in a damp environment. Water getting
into the device increases the risk of damage to the
device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e)
If working with the device outdoors, make sure to use
an extension cord suitable for outdoor use. Using an
extension cord suitable for outdoor use reduces the
risk of electric shock.
f)
If using the device in a damp environment cannot be
avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
g)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
h)
To avoid electric shock, do not immerse the cord, plug
or device in water or other liquids. Do not use the
device on wet surfaces.
i)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
j)
Do not use in very humid environments or in the
direct vicinity of water tanks.
k)
Prevent the device from getting wet. Risk of electric
shock!
l)
The supply voltage must not differ from the rated
voltage by more than +/- 5%.
2.2. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust.
c)
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
Rev. 22.04.2022
EN
h)
Use the device in a well-ventilated space.
i)
The device produces dust and debris during
operation. It is important to protect bystanders from
their harmful effects.
j)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
k)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
l)
Keep packaging elements and small assembly parts in
a place not available to children.
m)
Keep the device away from children and animals.
n)
If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.
o)
Consider the work area environment before starting
to work. Don't expose power tools to rain or wet soil.
Don't use power tools in damp or wet locations. The
work area should be well secured. Don't use the tool
in the presence of flammable liquids or gases. Power
tools produce sparks during normal operation or
when switching ON/OFF. Never use power tools in
dangerous sites containing lacquer, paint, benzene,
thinner, gasoline, gases, adhesive agents, and other
materials which are combustible or explosive.
REMEMBER! When using the device, protect children
and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
e)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
f)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
g)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h)
Use eye, ear and respiratory protection.
i)
The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate tools
for the given task. A correctly-selected device will
perform the task for which it was designed better and
in a safer manner.
11
Publicidad
