Machine-Related Safety Instructions; Technical Data - Festool T12+3 Manual De Instrucciones

5 BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically designat-
ed battery packs. Use of any other battery packs
may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal ob-
jects that can make a connection from one ter-
minal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irrita-
tion or burns.
6 SERVICE
a) Have your power tool serviced by a qualified re-
pair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.
Machine-related safety
instructions
– Wear ear protectors with impact drills. Exposure
to noise can cause hearing loss.
– Use auxiliary handle supplied with the tool. Loss
of control can cause personal injury.
– Hold power tools by insulated gripping surface
when performing an operation where the cutting
Cordless drill T12+3
Motor voltage
Idling speed
(Speed specifications with fully charged battery pack.
The speeds relating to LiIon packs are reduced.)
Max. torque
soft material (wood)
hard material (metal)
Adjustable torque
1st/ 2nd gear
Chuck clamping range
8
10.8 - 12 V
1st gear 0 - 450 rpm
2nd gear 0 - 1500 rpm
0.5 - 8 Nm
1.5 - 13 mm
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
– Wait until the power tool stops completely until
placing it down. The tool can become entangled
and lead to a loss of control of the power tool.
WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemicallytreated
lumber.
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.

Technical data

Cordless drill T12+3
Max. drill diameter in
Tool holder in drill spindle
Weight without battery
Cordless drill T15+3
20 Nm
Motor voltage
34 Nm
Idling speed
(Speed specifications with fully charged battery pack.
The speeds relating to LiIon packs are reduced.)
Health hazard by dust
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
WARNING
Wood
Metal
1st gear
2nd gear
25 mm (0.98")
14 mm (0.55")
1/4 ''
0.95 kg (2.0 lbs)
14.4 - 15.6 V
0 - 450 rpm
0 - 1500 rpm