Safety Information - Beta 1760 B Manual De Usuario E Información De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 68

SAFETY INFORMATION

The following safety information must be observed to insure maximum personal safety during
the operation at this meter:
Do not use the meter if the meter or test leads look damaged, or if you suspect that the meter
is not operating properly.
Never ground yourself when taking electrical measurements. Do not touch exposed metal pipes,
outlets, fixtures, etc., which might be at ground potential. Keep your body isolated from ground
by using dry clothing, rubber shoes, rubber mats, or any approved insulating material.
Turn off power to the circuit under test before cutting, unsoldering, or breaking the circuit. Small
amounts of current can be dangerous.
Use caution when working above 60V dc or 30V ac rms. such voltages pose a shock hazard.
When using the probes, keep your fingers behind the finger guards on the probes.
Measuring voltage which exceeds the limits of the multimeter may damage the meter and
expose the operator to a shock hazard. Always recognize the meter voltage limits as stated on
the front of the meter.
Never apply voltage or current to the meter that exceeds the specified maximum:
Beta 1760 B.indd 25

21-05-2010 15:11:17

Publicidad

Tabla de contenido
loading

Tabla de contenido