Technical Data - HAEGER Home Wind Instrucciones De Uso

English
Warning
• If you need to remove the safety guard, always switch the device off
and remove the mains plug.
• Under no circumstances should you immerse the device in water for
cleaning purposes. Otherwise this might result in an electric shock or
fire.
• Clean the outside of the device with a dry cloth without any
additives.
• If the device is very dirty wet a cloth with water and then wipe the
device dry once you have finished.

Technical Data

Model: ................................................................. FF-012.004A
Power supply: ...................................................... 220-240V~50/60Hz
Power consumption: .......................................... 40W
Protection class: ................................................. ΙΙ
Noise level: .......................................................... 60.5 dB(A)
Maximum fan flow rate: .................................... 23.65 m
Service value: ..................................................... 0.55 (m
Maximum air velocity: ....................................... 2.190 meters/sec
Measurement standard for service value: .... IEC60879:1986 (corr.1992)
Conformity
This device has been tested according to all relevant current CE
guidelines,
2014/30/UE, and low voltage Directive 2014/35/UE, and has been
constructed in accordance with the latest safety regulations.
4
such as electromagnetic
/min
3
/min)/W
3
compatibility
Instructions for use
Directive