Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
Control panel
01 Display
02 Buttons
NOTE
• The control panel is designed to stay off when the refrigerator is not in use. It only
becomes active and lights up when you open the door or tap the buttons.
• If the door is left open for 5 minutes, the internal light will blink for 5 minutes and
turn off. It is to alert deaf and hard of hearing users that a door is open. Note that this
function is normal.
• When you change the temperature on the panel, the panel displays the actual
temperature inside the refrigerator until the temperature matches the temperature you
set. Then, the panel displays the new set temperature. Note that it will take time for the
refrigerator to reach the new temperature. It is normal. During this time, you need not
set the temperature again.
Using the control panel
1. Tap any button ( ,
2. Tap
or
to select the desired menu, and then tap
3. Tap
or
to select the desired setting, and then tap
- For more information on available settings, see the Menu descriptions section.
42
English
Untitled-1 42
01
02
Displays the menu, settings, and other information.
• When the display is off, tap any button to wake up the display.
• Tap
or
to navigate left and right.
• Tap
to confirm your selection.
• Tap and hold
to enter the AP mode. (For more information,
see the "SmartThings > Getting started" section on page 48.)
, or
) to wake up the display.
to confirm.
to confirm.
2022-02-10
5:58:21
Publicidad
