Publicidad
Idiomas disponibles
Idiomas disponibles
Device description
EN
1. Touch screen
2. Flashlight button (double click)
3. Flashlight
4. On / SOS button / return to the home screen / screen lock
5. Charging connector
The set includes
- smartwatch
- charging cable
- user manual
Charging
Open the plug protecting the micro USB port, and then connect the micro USB cable
included in set. Next, plug the cable in the power source. The charging animation will be
displayed on the screen.
Installing the SIM card
Before inserting or removing the SIM card, always ensure that the watch is turned off. Never
insert or remove SIM card when the watch is turned on. Open the back flap of the watch by
carefully levering its upper part and sides until the latches are disengaged. Then, remove
the battery, paying attention not to damage the battery cables. Remember its positioning.
Open the protection of the micro SIM card by carefully moving it to the right, and then insert
the SIM card into the slot, so that the chip of the SIM card is facing up towards the screen
of the watch. Then, close the protection by moving it to the left. Place the battery in the
watch in its original position, and then close the back flap by engaging the latches.
First run
After installing the SIM card in the watch and charging the device, you can start it by pressing
and holding the on button. After starting, the watch connects to the mobile network.
Remember to insert the SIM card into the switched off device, only then it will read the data
of the SIM card.
Device operation
We operate the device via a touch screen. By sliding your finger on the screen, you can switch
between individual functions and you select a given function by pressing the screen.
1. Telephone - allows you to make a telephone call by manually entering the number.
2. The phone book - gives you access to contacts defined using the application.
3. Game - there is a math game in the tab.
4. Chat - allows you to receive and send messages between the application and the device.
5. Flashlight - turn off or on the flashlight
6. QR code - allows you to display the registration QR code and application QR code.
7. Steps - allows you to read the number of steps taken after activate the activity measurement
function in the application.
5
Publicidad
