Publicidad
If a clog prevents the normal flow of air to the motor, the thermal protector turns
the motor off automatically to allow the motor to cool in order to prevent
possible damage to the vacuum.
During this time the headlight remains on.
To correct problem, turn off and unplug vacuum, remove clogs and/or
clean/replace filters.
Empty dust bin if necessary.
Wait approximately thirty (30) minutes, plug vacuum in, turn on to see if thermal
protector has reset. Thermal protector will not reset if vacuum is not unplugged
even if vacuum cools down.
Cleaning Agitator
Thermal Protector
- 40 -
Clean agitator after every five uses.
Turn vacuum over, exposing the
agitator.
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
Publicidad
