Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
Slide upper spray gun holder (A) tab into slot on
left side of power washer unit (D).
From below, slide lower sprayer gun holder (B)
tabs into slots on bottom left side of power washer
unit (D).
Hold back the collar at one end of the end of the
hose (H). Push firmly to connect hose fitting to the
water outlet tube on the front of the power washer
unit (D). Twist the collar clockwise to secure.
Confirm hose is locked into the water outlet by
slightly pulling on the hose.
Note: DO NOT use pliers or locking pliers to tighten.
7
Publicidad
