Publicidad
Idiomas disponibles
Idiomas disponibles
Transport and Storage
Danger
Before transporting make sure all the lids are on
and fully tightened or locked in place.
Only transport and use in an upright position, do
not tilt or lie on its side.
Protect the unit from rain and frost. Do not store
outside or use in the rain.
Danger
The voltage specified on the type plate must
correspond to the voltage of the electrical source.
It is recommended that the machine is connected
via a residual current circuit breaker with
overprotection switch (max 30mA for 30ms).
Please use the mains cable provided by the
manufacturer and check for damage regularly. If
the cord becomes damaged please contact Matrix
for a replacement (using part code: 11RM00065)
prior to using the machine again.
Inadequate extension cords can be dangerous. If
an extension cord is used, it should be suitable
for outdoor use and the connection has to be kept
dry and off the ground by at least 60mm.
Turn off and remove the plug from the power
source when replacing parts or cleaning the
machine.
Appliance Socket
Caution
The appliance socket is only designed for the
purposes defined in the operating instructions.
The connection of different appliances can result
in damage.
Prior to plugging in the hose, switch off the
machine and only use the hoses as specified by
the manufacturer.
The machine has a pressure release valve built
into the unit which will open if the machine
pressure ever gets too high. This will release from
the bottom of the machine, if this happens please
contact your supplier or Matrix for repair or
information
If liquid or foam escapes from the machine,
switch off immediately and contact the distributor
or Matrix direct.
Structural Layout
1
3
5
1
Cold water tank
2
Variable steam control
3
Steam hose socket
4
No braked casters (rear)
5
Braked casters (front)
6
LED temperature display
7
LED heater on
8
Power on/off switch
9
LED steam ready
10
LED cold water refill
40
2
6
7
4
8
9
10
Publicidad
