sunjoe SJH904E Manual Del Usuario página 7

5. To convert back to the hedge trimmer, disconnect rear
handle and cutting head from ends of telescoping pole
by lifting the quick-release buttons A and B and pulling
straight out. Then re-insert the rear handle directly into
the hedge trimmer cutting head (Fig. 5).
Fig. 5
Quick-release
button (A)
Attaching the Shoulder Strap
m
WARNING!
Always attach the shoulder strap from
the unit before starting motor. Use the shoulder strap to help
support the trimmer while in use; do not carry the pole hedge
trimmer with only your hands.
1. Wear the shoulder strap over the left shoulder so that
the hook stays at your right hand side.
2. Fasten the shoulder strap to the buckle on the pole
(Fig. 6).
Fig. 6
3. Adjust the length of the strap to attain a comfortable
working position.
Telescoping
Quick-release
pole
button (B)
Buckle
Shoulder
strap
m
WARNING!
quick release which can be accomplished by simply squeezing
the sides of the the buckle (Fig. 7).
Fig. 7
Rear
handle
Operation
Connecting to Power Supply
1. Make a loop in the extension cord and push it up through
the hole in the rear handle and around the cord restraint
hook, then connect the extension cord to the appliance
cord (Fig. 8).
Fig. 8
Starting the Pole + Hedge Trimmer
Before operating the pole + hedge trimmer, stand in the
operating position and hold the tool with both hands so that
the cutting blades are always away from your body.
m
WARNING!
pole + hedge trimmer is not contacting any object.
m
WARNING!
personal protective equipment, including protective gloves,
non-slip footwear, safety goggles, ear defenders, and close-
fitting clothing.
7
The buckle is provided with a means of
Quick release
buckle
Rear handle
Cord restraint hook
Before you start the tool, make sure the
Ensure you are wearing all of the necessary
Extension cord