Video
Problem
An image displays in black and white or
the color quality is poor.
Horizontal or vertical bars appears or
images blur
Lines or streaks appear on images
Afterimages (ghosts) appear when the
product turns off
The power is on but the screen appears
extremely dark.
No Signal appears on the screen.
Black spots appear on the screen.
The display offset is wrong.
Thin lines appear in the background of
the screen.
The reception on some channels is
poor
CAUTION FOR USING EzSign 2.0
For LN549E series
Do not remove a USB drive while data is being copied. It can corrupt the data and EzSign may not work properly.
y
y
While loading a USB device or dongle, your TV may function slower than normal.
y
y
Some user-created subtitles may not work properly.
y
y
Some special characters are not supported in subtitles.
y
y
HTML tags are not supported in subtitles.
y
y
Subtitles in languages other than the supported languages are not available.
y
y
EzSign 2.0 TV function does not work before completing the initial setup Wizard. Make sure to complete the initial
y
y
setup Wizard by turning on the TV after installation.
If the time is set according to the TV signal, it may not appeared exactly for some region. In that case, set the time
y
y
manually.
It is recommended that you copy files to the TV memory before playing them, as playing directly from the USB
y
y
memory for an extended period of time may cause the device to overheat.
In EzSign 2.0 TV mode, some remote control keys may not work.
y
y
EzSign 2.0 TV dose not support the USB HUB. It is recommended that you connect a USB device directly to the TV
y
y
without using a USB extension cable as it may not work properly.
It is recommended that you use EzSign 2.0 TV within 8 hours per day as it is standard.
y
y
Refer to the EzSign 2.0 Editor user guide for details.
y
y
EzSign 2.0 TV does not support Store Demo.
y
y
Supported external subtitle format:*.smi/*.srt/*.sub(MicroDVD, Subviewer 1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.
y
y
psb(PowerDivX)
Do not update the EzSign content via wireless networking and a USB drive at the same time. And do not play content
y
y
from a USB drive while updating EzSign content via wireless networking.
TROuBLESHOOTiNG / cAuTiON FOR uSiNG EzSign 2.0
y
y
Adjust the color setting in the menu option.
Keep a sufficient distance between this product and other electronic products.
y
y
Scroll to other channels. There may a problem with the broadcast.
y
y
Check if there are local interferences such as an electrical appliance or power tool.
y
y
Check the antenna or aim the antenna to the proper direction.
y
y
Pixels may have been damaged from a fixed image displayed for a long time (image burn).
y
y
Use a screen saver to prevent the pixel damage on the screen.
Adjust the brightness and contrast in the menu option.
y
y
Check if the signal cable is connected between the TV and products properly.
y
y
Check the selected input source by pressing INPUT.
y
y
Several pixels in red, green, white, or black may appear on the screen that can attribute to
y
y
the characteristics of the panel.
This is normal.
y
y
Adjust the position setting in the Picture menu.
y
y
Check if the video card resolution and frequency are supported by the product. If the
y
y
frequency is out of range, set to the recommended resolution using the display settings on
the external device.
Check the video cable connections.
y
y
Scroll to other channels. There may a problem with the broadcast.
y
y
The station signal may be weak. Aim the antenna to the proper direction.
y
y
Check if there is local interferences such as an electrical appliance or power tool.
y
y
Solution
25