Publicidad
Idiomas disponibles
Idiomas disponibles
EXTERNAL CONTROL dEVICE SETUP
RS-232c Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/
V control system) to control the product's functions
externally.
Connect the serial port of the control device to the RS-
232C jack on the product back panel.
NOTE
RS-232C on this unit is intended to be used with
y
y
third party RS-232C control hardware and software.
The instructions below are provided to help with
programming software or to test functionality using
telenet software. RS-232C connection cables are
not supplied with the product..
RS-232C IN
(CONTROL & SERVICE)
EXTERNAL cONTROL dEVicE SETuP
Type of connector;
d-Sub 9-Pin Male
1
6
RS-232C IN
(CONTROL & SERVICE)
No.
1
No connection
2
RXD (Receive data)
3
TXD (Transmit data)
4
DTR (DTE side ready)
5
GND
6
DSR (DCE side ready)
7
RTS (Ready to send)
8
CTS (Clear to send)
9
No Connection
27
5
9
Pin name
Publicidad
