Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
* Please keep this owner's manual for future reference.
*If you have opened the carton and removed all packages, please disregard the STEP 1 and 2.
(1) Lift off the carton carefully
STEP 1.
and be wary of the accessories inside falling
away. Take away the box containing lava
rocks.
(2) Take all the packing materials away
except for the polyfoam rounding the top of
the firebowl.
See Figure STEP 1.
STEP 1
STEP 3.
(I)Make sure the gas valve is turned "OFF" before
assembling. Check each part before using the product.
To set the gas tank in the firebowl, screw it to the
regulator inlet fitting inside the firebowl.
See Figure I.
(II) Place the lave rocks on the burner averagely. See
( )
Figure II.
(III) After assembling the gas tank, push and turn the
Control Knob counter-clockwise, then use a match or a
lighter to light the firebowl. To adjust the flame, turn the
Control Knob. Push and turn the Control Knob
clockwise to turn the flame off. See Figure I and III.
STEP 4. LEAK TEST
Perform leak test in a well ventilated area outside and where no source of spark can occur.
Connect cylinder to regulator. Turn the on/off valve at the unit to the 'off' position to pressurize the control system. Use a
soapy water solution to check all the connections leaks before attempting to light the appliance. If a leak is found or you
smell gas, disconnect cylinder and turn valve off and do not use the appliance until repairs can be made.
TIPS:
Before Beginning ●Read the instructions thoroughly.
●Check and make sure that all parts are present.
●For future reference, save this owner's manual.
See the STEP 3 directly.
Cut off the binding tape on the polyfoam and
STEP 2.
remove all the polyfoam rounding the top of the firebowl.
See Figure STEP 2.
STEP 2
g y
I
II
4
III
Publicidad
