Part Three: Navigating And Selecting; Power-On Self Test - Phonic IS16v1 Manual Del Usuario

PART THREE: NAVIGATING AND SELECTING

Operation of the IS16 is made easy through the use of the full color touch screen. When first activated, the main menu of the IS16 will
appear and users can jump directly to any particular function by touching the appropriate onscreen icon.
Start-up
The IS16 takes around two minutes to start up. The first screen users will see on the display is a red Phonic logo with a blue status bar
indicating the status of the start up process. After this is done, the display will show the status of the DSP check.

Power-On Self Test

As soon as you turn on IS16, its central processing unit begins to carry out the programming instructions contained in the basic input/output
system. The CPU is responsible for the following system and diagnostic functions:
• Loading software
• Performing initial hardware DSP checks
If you see any error codes pop up during the testing phase, please turn off the unit and remove the power supply. Wait a minute, then
replace the power supply and restart. This could rectify the problem. If the problem persists, however, please perform a system restore.
When turning the system on you will be prompted to recall the settings from your previous session. You can opt to recall the last session's
settings or select no to revert back to default settings.
IS16
7