Phonic IS16v1 Manual Del Usuario página 32

10.2 Clock Source
In the Clock Source tab of the Utility menu, users are able to select the clock source of the AES/EBU input and output. The clock source can
be selected from Internal (with sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz), the digital device, or the Word Clock input/output.
The selected Sampling Rate – or that set by the external device – is displayed at the bottom of this menu.
NOTE: The Enter button must be pushed to confirm new Clock Source settings.
10.3 LCD Calibration
Select this tab to calibrate the IS16's color touchscreen. When the LCD Calibration tab is selected, crosshairs will appear onscreen and users
should select these one by one to calibrate the touchscreen. If the screen becomes uncalibrated for whatever reason, and the appropriate
menu cannot be selected, users should use the IS16's onboard controls to navigate the GUI and bring up the LCD Calibration function.
If it becomes necessary to calibrate the screen, users can use the tab buttons, directional buttons and ENTER button on the IS16 to allow
them to access the calibration function.
28
IS16