Publicidad
8
EN: Quick Installation Guide
Installation environment
When installing your product, consider these factors:
•
Electrical: Install electrical wiring carefully. It
should be done by qualified service personnel.
Always use a proper PoE switch, a 12 VDC UL
listed Class 2, or CE certified power supply to
power the camera. Do not overload the power
cord or adapter.
Ventilation: Ensure that the location planned
•
for the installation of the camera is well
ventilated.
•
Temperature: Do not operate the camera
beyond the specified temperature, humidity or
power source ratings. The operating
temperature of the indoor camera is between
-30 °C to +60 °C. Humidity 95% or less (non-
condensing) for both cameras.
•
Moisture: Do not expose the camera to rain or
moisture, or try not to operate it in wet areas.
Turn the power off immediately if the camera is
wet and ask a qualified service person for
servicing. Moisture can damage the camera
and also create the danger of electric shock.
•
Servicing: Do not attempt to service this
camera yourself. Please refer to the
instructions in this manual when removing the
camera cover. Refer all servicing to qualified
service personnel.
P/N 1015-ALL • REV B • ISS 03AUG21
https://firesecurityproducts.com/en/products/vi
deo/cameras
Cleaning: Do not touch the bubble with
•
fingers. If cleaning is necessary, use a clean
cloth with some ethanol and wipe the camera
bubble gently.
Specifications
Electrical
Voltage input
Power consumption
Miscellaneous
Connectors
Operating temperature
Dimensions
Weight
Environmental rating
DE: Schnellinstallationsanleitung
Installationsumgebung
Beachten Sie beim Installieren des Produkts
folgende Faktoren:
•
Elektrik: Gehen Sie bei der Installation von
elektrischen Leitungen sorgfältig um. Die
12 VDC, PoE (IEEE
802.3af)
Max. 10.5 W
Network Port(PoE), Audio
In/Out, Alarm In/Out,
CVBS Output, RS-485
Port, 12 VDC Power In
-30 to +60 °C
Ø 141 × 123 mm
900 g
IK10
3 / 11
Publicidad
