Publicidad
Idiomas disponibles
Idiomas disponibles
SWING function
Carry out the operations below when the air conditioner is in service.
1.
Press the SWING button to activate the swing function. The vertical blades will now move up and down
to distribute the air to the room better in the vertical direction.
2.
Press the SWING button again, the vertical blade will stop at the position during the moment the
SWING button is pressed.
Horizontal air distribution
The horizontal air flow can be changed manually by adapting the horizontal blades with the levers, see
picture.
Levers
SLEEP mode
Carry out the operations below when the air conditioner is in service.
1.
Press the SLEEP button to activate the sleep function.
2.
Press the SLEEP button or the MODE button to select another mode and turn off the SLEEP mode.
In SLEEP mode the air conditioner will control the room temperature as follows:
1.
In the cooling mode the set temperature will be increased automatically by 1°C after 1 hour. After two
hours, the set temperature will be increased again by 1°C.
2.
In the heating mode the set temperature will be decreased automatically by 1°C after 1 hour. After two
hours, the set temperature will be decreased again by 1°C.
3.
In the FEEL mode the air conditioner will set the temperature according point 1 or 2, depending on
whether the air conditioner must cool or heat the room.
In the SLEEP mode, the air conditioner will be turned off automatically after 10 hours.
The SLEEP mode can only be used when the FEEL, cooling or heating modus is selected.
4
49
Publicidad
