Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Deactivate cooking zones
Deactivate cooking zone by doing one of the following:
•
Turn off the hob with the
•
Touch and hold the
•
Touch
to activate the cooking zone and slide to the left to reduce the heat setting "0."
Turn off the appliance
The appliance operates when at least one cooking zone is on.
•
Turn off the hob with the
If a cooking zone is still hot, the relevant display will show the letter "H" or "h" to indicate
residual heat. For description of the symbol, see below.
Booster function "P"
Booster function increases the power of the 220x190 mm cooking zone from 2200W to
3700W, and Bridge cooking zone (220 x 390 mm) from 3600W to 5500W.
•
Place the cookware on the desired cooking zone.
•
The cookware will be automatically detected and the relevant display
hing "0."
•
Touch
to activate the Booster function — the display will show the letter "P".
Turn off the Booster function:
•
Touch the
sensor and slide your finger to "0" to turn off the Booster function.
Booster function can be activated for up to 10 minutes. After that time, the cooking zone
heat setting is set to the nominal power (for example, if the heat setting range is 0-9, the
nominal power is 9, if the range is 0-12, the nominal power is 12, etc.).
This function can also switch back to the nominal power, if any hob components overheat.
You can reactivate the Booster function when the internal components cool down to safe ran-
ge. This function will not start automatically.
When you take the pot off the cooking zone when the Booster function in on, a 10-minute
countdown will not be interrupted.
sensor.
sensor for 3 seconds
sensor.
will show flas-
49
Publicidad
