Publicidad
Idiomas disponibles
Idiomas disponibles
Table of contents - Part 1
1.1
General information ..................
1.2
Scope of delivery ......................
1.3
Conventional use ......................
1.4
Technical data ..........................
1.5
Components.............................
1.6
Maintenance.............................
1.7
Compressor inspections .............
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1
General information
Observe the safety instructions!
Read the Instruction Manual!
1.4
Technical data
Suction capacity
Filling capacity
Voltage
Electric protection, delayed-action
Motor output
Max. operating speed
Compression final pressure
Switch-on pressure
Vessel capacity
Maximum permissible working overpressure of vessel
1
Oil quantity
L
Sound power level according to DIN EN ISO 3744 (RL 2000/
WA
14/EC)
L
Sound pressure level at distance of 4 m
PA4
Overall dimensions: width x depth x height
Weight
Max. number of switching cycles
Operation/Downtime ratio
Min. distance to wall
Ambient temperature
1.
Initial filling: mineral oil up to 10 °C. Under 10 °C, use fully synthetic oil.
1.5
Components
01
Compressor unit
02
Intake filter
03
Oil dipstick
04
Oil drain screw
Note: Read and memorise part 2 of the in-
struction manual!
3
Subject to technical modifications. Illustra-
tions may deviate from the original.
3
3
1.2
Scope of delivery
3
– Compressor with instruction manual
3
– Documents accompanying compressed air
4
vessel
4
1.3
Conventional use
The compressor is designed for generating
and storing compressed air only. Com-
pressed air is only suitable for compressed
air tools/devices/machines.
Any other type of use is considered contrary
to the intended use.
06
Connecting hose
07
Check valve
08
Vessel
09
Condensate drain valve
10
Pressure switch with ON/OFF switch
BAM 400-10-50 W
390 l/min
285 l/min
230 V
16 A
2.2 kW
1400 rpm
10 bar
8 bar
50 l
11 bar
0.5 l
96 dB(A)
76 dB(A)
830 x 410 x 725 mm
56.5 kg
10 1/h
60:40 --
40 cm
5-35 °C
GB
I/3
Publicidad
