Oster GCSTEP2501 Serie Manual De Instrucciones página 16

1. Turn off the Iron and disconnect the plug from the electrical wall outlet before filling
the Iron with water.
2. Turn the Steam Select Switch to the closed position
3. Set the Iron in the position indicated below (figure 2) and fill it with water, no higher
than the Max fill level shown on the See-Through Water Window.
1. Insert the plug in the electrical wall socket.
2. Make sure that the Steam Select Switch is in the closed position
3. After the Indicator Light goes off, you may start to iron.
GCSTEP2501_GCSTEP2502_20SEM1 (LA).indd 5
FILLING WITH WATER
(figure 2)
DRY IRONING
E n g l is h -5
.
.
5/19/20 6:05 PM