All manuals and user guides at all-guides.com
Note: The dishwasher will automatically release detergent within a few minuteafter
the start of the wash program. To avoid the "release of detergent" before
you cancel or reset the wash program, you must press the "START/PAUSE"
button right away.
• Once you have reset to a new wash cycle, you must refill the detergent
compartment if it is open and empty because the detergent from previous wash
cycle may have already been released.
Follow the steps below to cancel or reset a wash program:
1) Press "START/PAUSE" button to pause the wash program.
2) Turn "OFF" the dishwasher power by pressing the "POWER" button to cancel the
program.
3) Turn the dishwasher back "ON" again by pressing the "POWER" button.
4) Reset by reselecting the porper wash program.
5) Reselect the proper wash option(s) with the selected wash program.
6) Press the "START/PAUSE" button to begin the wash process.
Pausing a Wash Program:
If you need to pause in the middle of the cycle to add or remove any items, follow
the steps below:
1) Press the "START/PAUSE" button to pause the wash process during the program.
When the wash process is paused, the selected wash program and option(s)
indicator light(s) will stay still.
2) Open the door by squeezing the door latch slowly.
Note: DO NOT open the door until the water spray action has stopped. Be
careful of moist hot air that may rise out of the dishwasher.
3) Add or remove items. Once you are finished adding or removing, simply close
the door properly.
4) Press "START/PAUSE" to resume the program. You will notice that the power
indicator display light turns on.
Understanding The Open Door Protection:
Your dishwasher will stop and beep automatically if the door is opened during the
operation. The dishwasher will not start and the beep will not shut off until the door
is closed again. Once the door is closed, the program will resume automatically.
Warning: The dishwasher door must be closed at all times during
the operation.
English
8