Publicidad
Idiomas disponibles
Idiomas disponibles
English
Using Your Dishwasher
Check List for Wash Process:
1) Make sure all items are loaded in the racks and silverware basket properly.
(Refer to page 15)
Note: Do not load tall dishware or cookware items near the middle spray arm
because it may block the spray arm from rotating.
2) Pour the proper detergent into the detergent dispenser.
Note: If rinse aid compartment is empty, add "Rinse Aid" agent at this time.
3) Close the door and latch properly.
4) Turn on the power button.
5) Select your desired wash program
page 11)
based on the load and soil type.
6) Press the "START/PAUSE" button once to start the wash process. Press this button
once again if you want to "Pause" the activity during the wash process in order
to add or remove items.
Note: Selected wash program and option(s) blinking light(s) will indicate that the
wash process has begun and is running. When paused, the selected wash
program and option(s) light(s) will be still. This indicates that wash
process is paused.
7) At the end of the wash program, the machine will beep a few times to indicate
that the wash process has finished. Simply shut off the unit by pressing the
"POWER" button.
Note: DO NOT open the dishwasher door immediately because the moist hot
air remaining inside the tub may cause harm.
Warning: Keep children away from the machine when the door is
left to dry the dishware because the moist hot air is
exiting out of the door may cause harm.
Resetting Wash Cycle
7
All manuals and user guides at all-guides.com
(Refer to page 10)
and option(s)
(Refer to
Canceling or
Publicidad
