Philips AMF220/75 Manual Del Usuario página 10

Filter replacement
When the filter replacement alert lights up
Note:
• The filter is not washable or reusable�
• Do not smell the filter because it contains air pollutants�
Replace the filter when
1 Replace the filter with Philips filter (FYM220/30)� Follow the instructions in the chapter
"Installing the filter"�
2 Press to switch on the appliance�
3
Press and hold the
» The filter replacement alert
4
Wash your hands thoroughly after replacing the filter (fig
Before the filter replacement alert lights up
You can replace the filter before the filter replacement alert (
need to reset the filter lifetime counter manually�
1
Unplug the appliance from the power outlet and wait 10 seconds�
2 Plug the appliance into the power outlet (fig
3
Within 15 seconds after power on, press and hold the
the filter lifetime counter�
» The filter replacement alert
5 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance� If you are unable to solve the problem with the information below, contact the
Consumer Care Center in your country�
Problem
The airflow from
the air outlet is
significantly weaker
than before�
6
EN
lights up on the screen (fig
button for 3 seconds to reset the filter replacement time (fig
disappears from the screen�
blinks once after successfully resetting the filter�
Possible solution
• The surface of the filter is dirty� Clean the surface of the filter (see
the chapter "Cleaning and maintenance")�
)�
x
)�
w
) lights up� If you do this, you
)�
z
button for 3 seconds to reset
)�
y