Publicidad
Idiomas disponibles
Idiomas disponibles
Sleep, turning light on/off
1
Press and hold the
» The display screen dims, rest lights will turn off�
2
Press any button to turn all lights on�
Pairing your remote control
1
Unplug the appliance from the power outlet and wait for 10 seconds� Plug in the
appliance, then within 5 seconds,press the
» The 2h indicator lights up�
2
Long press the
button for 5 seconds on the remote control within 5 seconds (fig
» The
and
operates in the fan mode, indicating that the pairing is successful (fig
Note: If the "2h" indicator is blinking, you must repeat the pairing�
Replacing the battery
1
Push the battery bracket edge gently and pull it out of the remote control (fig
2
Insert the new battery with correct polarities as indicated (fig
3
Put the battery bracket back into the remote control (fig
4 Cleaning and maintenance
Note: Switch off the appliance and unplug it from the power outlet before continuing�
Cleaning the body of the appliance
Use a soft, dry cloth to clean the appliance surface, including air inlet and outlet�
Clean particle sensor surface� Do not open particle sensor cover� (fig
Cleaning the filter surface
Clean the filter surface with a vacuum cleaner or brush every two weeks�
1
Pull the back cover and remove it from the appliance (fig
2
Pull the filter from the appliance (fig
3
Clean the surface of the filter with a vacuum cleaner (fig
4
Put the filter back into the appliance (fig
5
Reattach the back cover (fig
6
Wash your hands thoroughly after cleaning the filter (fig
button for 3 seconds (fig
indicator of fan button on the appliance lights up, and the appliance
)�
u
g
)�
h
)�
m
button on the appliance twice (fig
)�
r
)�
s
t
)�
d
)�
v
)�
)�
w
)�
n
)�
o
)�
p
)�
q
)�
5
EN
Publicidad
