LG WM8100HVA Manual Del Propietário página 23

Time and Status Display
Cycle Status Indicator
1
These LEDs illuminate when a cycle is selected
to indicate which stages are included. When a
cycle is running, the LED for the active stage
blinks, and the LEDs for the remaining stages
remain steady. Once a stage is complete, the
LED turns off. If a cycle is paused, the active
stage LED stops blinking.
Door Lock Indicator
2
The Door Lock indicator will light up once a cycle
has started. The indicator light will stay on until
the cycle is paused, stopped or has finished.
Estimated Time Remaining
3
When a cycle is selected, the default time for
that cycle is displayed. This time will change
as modifiers or options are selected. Once the
Start/Pause button is pressed, the washer will
measure the size of the load. The estimated
time may change once the load size has been
measured. If Delay Wash is set, the remaining
delay time counts down until the cycle begins.
NOTE
• The time shown is only an estimate. This
time is based on normal operating conditions.
Several external factors (load size, room
temperature, incoming water temperature, etc.)
can affect the actual time.
OPERATION 23