Publicidad
Idiomas disponibles
Idiomas disponibles
CAuTION: When working on metal surfaces, do not use the dust canister or a vacuum
cleaner because sparks are generated. Wear safety glasses and a dust mask. Due to the
danger of fire, do not use your sander to sand magnesium surfaces. Do not use for wet
sanding.
Dust canister - figure L
Attaching and removing:
• Fit the dust canister over the dust extraction
outlet. To remove the canister, pull it out to the
rear and off the outlet.
Emptying the dust canister (fig. L & M)
The dust canister (9) should be emptied after
every ten minutes of use.
• Pull the dust canister (9) to the rear and off the
tool.
• Remove the cover (24) by twisting it counter
clockwise.
• Hold the dust canister (9) with the filter (25)
facing down and shake the canister to empty
the contents. Shake the cover (24) to empty
the contents.
• Refit the cover (24) onto the dust canister,
twisting it clockwise until it locks into place.
• Refit the dust canister (9) onto the tool.
Cleaning the dust canister filter
The dust canister filter is re-usable and should be cleaned regularly.
• Empty the dust canister (9) as described above.
• Pull the filter (25) off the dust canister.
• Shake off excess dust by tapping the filter into a dustbin.
warning: Do not brush or use compressed air or sharp objects to clean the filter. Do not
wash the filter.
• Replace the filter (25).
• Refit the cover (24).
• Refit the dust canister (9) onto the tool.
hints for optimum use
• For user comfort, the tool can be operated with
one hand or two as shown in figure N. Do not
place your hands over the ventilation slots.
• Do not exert too much pressure on the tool.
• Regularly check the condition of the sanding
sheet. Replace when necessary.
• Always sand with the grain of the wood.
• When sanding new layers of paint before
applying another layer, use extra fine grit.
• On very uneven surfaces, or when removing
layers of paint, start with a coarse grit. On
other surfaces, start with a medium grit. In
both cases, gradually change to a fine grit for a
smooth finish.
L
M
N
10
9
3 9
25 24
Publicidad
