Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and Disposal
• All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the
duration of the sanding project. Vacuum filter bags should be changed frequently.
• Plastic drop cloths should be gathered up and disposed of along with any dust chips
or other removal debris. They should be placed in sealed refuse receptacles and
disposed of through regular trash pick-up procedures. During clean up, children and
pregnant women should be kept away from the immediate work area.
• All toys, washable furniture and utensils used by children should be washed
thoroughly before being used again.
Introduction
The MS2000CY is a complete sanding kit that allows you to choose between 4
different sanding configurations to do a variety of tasks. Combining the versatility with
the Smart Select
TM
Assembly
warning: Before assembly, make sure that the tool is switched off and
unplugged.
Removing sanding bases - figure B
• To remove the sanding base, press the
release button (3) and pull the base (6) off
the tool.
Random orbit sanding base
With this sanding base, you can use the tool as a random orbit sander.
Attaching the random orbit sanding base - figure C
• Hold the tool and the sanding base (5)
facing upwards as shown in figure C.
• Align the dust openings (10) in the sanding
base with the dust openings (11) in the
tool base.
• Press in on the sanding base until you
hear it click into place.
feature, the sander gives you optimal results.
B
C
5
10
11
6
6
3
10
11
Publicidad
