SIOUX SAG10S Serie Instrucciones Y Lista De Partes página 4

Hold the collet body with a 9/16" (14mm) wrench and the collet nut with a 3/4" (19 mm) wrench.
Turn the collet nut to the right and firmly tighten the collet on to the wheel shank.
REMOVING MOUNTED WHEELS
To remove the mounted wheel, hold the collet body with a 9/16" (14 mm) wrench and the collet nut with a 3/4" (19 mm) wrench.
Turn the collet nut to the left and loosen the collet.
Remove the mounted wheel.
SOUND AND VIBRATION READINGS
*Sound Pressure *Sound Power *Vibration
Catalog No. dBA dBA m/s
2
SAG10S 77.7 89.3 Less than 2.5
*per PN8NTC1 *per PN8NTC1 *per ISO 8662
DECLARATION OF CONFORMITY
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
SAG10S
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
EN 792, ISO 12100-1, ISO 12100-2, ISO 8662, Pneurop PN8NTC1
following the provisions of
98/37/EC Directive.
July 1, 2009
Robert Hartman
Murphy, North Carolina, USA
Vice President and General Manager-Power Tools
Signature of issuer
Date and place of issues
Sioux Tools Inc
Name and position of issuer
4