Lifting an elevated load (cont.)
2. Move forward slowly, making adjustment
as needed, until the forks are fully en-
gaged and the load is against the back-
rest. Apply the park brake. Raise the forks
just enough to lift the load. Tilt the mast
back slightly with the heaviest part of the
load against the backrest. Fig 5.
3. Retract the mast fully. Lower the load to
transport position. Side shift the mast to
center the load as needed.
4. Check traffic, release the park brake, place
the forklift in reverse and cautiously back
the forklift. Watch your direction of travel
and the stability of your load. Fig 6.
Bright Forklift
BD3–7570
Load Handling Instructions
Fig 5
Fig 6
29