Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO U SE
This product is for household use only.
G ET T I N G STA RTE D
• Remove all packing material, any stickers from the product, and the
plastic band around the plug.
• Remove and save literature.
• Please visit www.prodprotect.com/blackanddecker to register your
warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
BLENDER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on
counter top or work surface.
2. Place the gasket against the blending jar.
Important: Gasket MUST be between the jar and blade
assembly or the blender will not function properly.
3. Place the blade assembly, blade first, into the jar. (A).
4. Place jar base onto jar and rotate clockwise until it is
tight (B).
5. Turn assembled jar right side up.
6. Place lid onto blending jar.
Note: Do not plug in the cord.
7. Place on base, making sure it is pressed firmly
into place. (Jar base should not extend more than 1⁄8-inch above the rim
at the top of the base.)
USING YOUR BLENDER
Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place foods to be blended into jar. For best results place ingredients in jar
in the following order: liquids, powders, soft foods, hard foods, ice.
3. Place lid on jar. Make sure the pour spout and ingredient slot are closed.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice or cheese, keep one hand on the lid to keep blender in place.
5. Select the speed that best suits your desired task.
(See SPEED CHART)
Note: Use PULSE for no more than five seconds at a time, allowing the
blender to rest briefly between each pulse, no more than two minutes total.
This helps break up the ice and distribute the ingredients.
4
BL2208PB_29618_ES_A.indd 4
BL2208PB_29618_ES_A.indd 4
A A
B B
12/21/22 11:47 AM
12/21/22 11:47 AM
Publicidad
