Instruction manual
PaRTS lIST
1. Temperature control
2. Adjustable foot
2
BeFoRe The FIRST uSe
• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50/60Hz)
4
1
FIRST uSe
• The freezer temperature can be adjusted by turning the thermostat
knob, the closer the knob is set to the '3' position, the lower the
temperature will be. A medium setting is the moste suitable for general
operation.
• The temperature will vary depending on the quantity of content stored
and how often door will be opened and closed.
• In order to maintain good cooling efficiency and save energy, we
recommend you not to store too much foods and not to open the door
too frequently.
DooR ReVeRSal INSTRuCTIoNS
• Choose which side you would like the door to open, right handed
(standard) or left handed (optional)
• To change door position remove the two screws from back of top panel
and lift off panel
• Remove the metal pin from door and detach door by lifting upwards,
then position unit so you can remove the two screws holding the
bracket onto the bottom of the appliance.
• Reposition the bracket on the opposite side of the appliance, remove
blanking plug from top of door and insert metal pin, re attach the top
panel and tighten screws at rear and insert the blanking plug into top
of door.