All manuals and user guides at all-guides.com
INSTALLATION INSTRUCTIONS
Warning – Risk of Fire
!
• Washer/Dryer Combo installation must be performed by a qualified installer.
• Install the Combo according to the manufacturer's instructions and local codes.
• To reduce the risk of severe injury or death, follow all installation instructions.
• Save these instructions
Tools and Materials Required
You will need to have the following tools
to help you in the installation of your washer:
• Scissors
• Standard Screwdriver
• Pliers
• Wrench
Accessories Supplied
1. Hot & Cold Water Inlet Hoses
2. Pressure Regulator
(Attached to Hot & Cold Water Inlet Hoses)
3. Flat Water Inlet Hose Washers
(Installed in each end of water inlet hoses)
4. Use & Care Guide (Not Shown)
5. Plastic Plugs to cover
transportation bolt holes
6. Drain hose support bracket
1
3
USER MANUAL
4
• Tape Measure
• Gloves
• Level
5
2
6
Quantity
2
2
4
1
3
1
English
8