Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
18V CORDLESS DRILL/DRIVER
Operator's Manual
SPECIFICATIONS:
• Model: ------------ - ----------- GCD18CP
• Charger Input:----------------- 120 V~ 60 Hz
• Motor: ------------------------- 18 V DC
• No-Load Speed: --------------- 0-550 RPM
• Chuck Size: --------------------3/8" (10mm)
• Torque Settings: --------------- 21
• Charger Input: ---------------- 120V~, 60Hz
• Charging Time: --------------- 3-5 Hours
Includes: Drill, 1-Battery Pack, Charger and 13-Piece Drill/Driver Bit Set
WARNING:
To reduce the risk of injury, user must read and understand this
operator's manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WeAR YOuR
objects being thrown into your eyes, which can result in severe eye damage.
SAfeTY GLASSeS
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with
fOReSIGHT IS BeTTeR
THAN NO SIGHT
side shields. Always wear eye protection which is marked to comply with ANSI
Z87.1.
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
GENERAL SAFETY RULES
WARNING:
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
18V Cordless Drill/Driver
Operator's Manual
WARNING:
The Operation of any power tool can result in foreign
GCD18CP
Publicidad
