Publicidad
Idiomas disponibles
Idiomas disponibles
3. Yellow LED: Ice Harvest indicator light.
When this LED is lit, the unit is working in the Ice Harvest mode controlled by a
temperature probe on the evaporator. When the yellow LED is flashing, the unit is
working in the Ice Harvest mode controlled by a fixed timer.
4. Clean button: When this button is pressed, the unit enters the Cleaning mode. The
green and yellow LEDs flash together. To stop the Cleaning mode, just press the
button again.
5. Mode button: Mainly for service. When this button is pressed, unit can change from
Ice Making mode to Ice Harvest mode, or from Ice Harvest mode to Ice Making
mode. You can judge the mode from the status of the green and yellow LEDs.
6. Ice size adjust: Turn the screw clockwise, and the size of individual ice cubes will
be larger in the next cycle; the cycle time will be longer. Turn the knob counter-
clockwise, and the ice size will be smaller in the next cycle. It is not recommended
that the ice size be adjusted after installation.
7. If the red, green and yellow LEDs are flashing together, the machine is not working.
The major fuse of the control box has failed. Call for service.
NOTE: Avoid letting water contact the control box.
1. Completely automatic operating procedure.
2. When the ice storage bin is full of ice cubes, the machine stops working automatically
and starts again after the cubes are removed.
3. The different colors of the LED display indicate various work modes.
4. Indication of failure of major control box fuse.
5. The fan motor responds to the ambient temperature. If it is cold, the motor will stop
working to keep the cooling system in good working condition.
6. Ice cube size is adjustable.
7. A sensitive probe and accurate timer enhance the performance of the ice maker.
8. Manual Clean mode to start or stop the ice making system cleaning.
9. Built-in compressor protection system.
All manuals and user guides at all-guides.com
MAJOR FUNCTIONS
25
Publicidad
