Publicidad
Idiomas disponibles
Idiomas disponibles
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-
8669).
ASSEMBLY INSTRUCTIONS
STEP 1:
Remove the preassembled 4 Carriage Bolts (No. 6),
4 Flat Washers (No. 7), 4 Spring Washers (No. 8),
4 Acorn Nuts (No. 9) and 2 Shipping Tubes (No. A)
from the Main Frame (No. 1) with the Spanner (No.
42).
NOTE: You may discard Shipping Tubes (No. A) or
save them to repackage the item in the future.
Attach the Front & Rear Stabilizers (No. 2 & No. 12)
to the Main Frame (No. 1) using 4 Carriage Bolts
(No. 6), 4 Flat Washers (No. 7), 4 Spring Washers
(No. 8) and 4 Acorn Nuts (No. 9) that were just
removed. Tighten and secure with the Spanner (No.
42).
Loosen and pull out the L Shaped Knob (No. 16)
from the Main Frame (No. 1). Insert the Seat Post
(No. 18) into the Main Frame (No. 1), and lock with L
Shaped Knob (No. 16).
STEP 2:
First, insert the L Shaped Knob (No. 16) into the
front tube of the Main Frame (No. 1). Turn clockwise
to tighten all the way. Then turn counter-clockwise to
loosen the L Shaped Knob (No. 16) enough to
insert the Handlebar Post (No. 25).
Insert the Handlebar Post (No. 25) to the front tube
of Main Frame (No. 1), adjust to the proper height,
and insert and tighten L Shaped Knob (No. 16) to
secure.
Attach the Handlebar (No. 26) to the Handlebar
Post (No. 25). Insert L Shaped Knob (No. 27) and
Flat Washer (No. 32) and tighten to secure.
Attach the Seat (No. 28) to the Seat Horizontal
Post (No. 19). Tighten and secure with the Spanner
(No. 43).
NOTE: Before exercise, please make sure the Seat
(No. 28) is tightened to the Seat Horizontal Post
(No. 19).
15
Publicidad
