JVC DLA-X90R Manual De Instrucciones página 62

3
Adjustments and settings in the menu (continued)
Level Check
0 235
255 16
Color Space
Auto
YCbCr (4:4:4)
YCbCr (4:2:2)
RGB
Control with HDMI
[2-2] PC
90 70
Configure this when using the PC terminal.
Use the UP and DOWN keys to select items. Press the [BACK] key toreturn to the
previous screen.
(*) This can be set when the PC terminal is selected.
Items
Auto Alignment
Tracking
Phase
Picture Position
Horiz
Vert.
62
Operation
You can confirm the dynamic range of the input signal.A pattern as shown in the
illustration is displayed in the four corners and center of the screen. Please compare the
dynamic range of input signal with this pattern illustration and confirm.
(*) The number in the illustration is the scale level. This number is not displayed. The
illustration of the gradation in the figure is accentuated for explanatory purposes It is
different from the actual scale level.
It sets the color space of the input signal.
Settings: Auto, YCbCr(4:4:4), YCbCr(4:2:2), RGB
YCbCr(4:4:4), YCbCr(4:2:2), RGB signals are automatically detected and configured.
Sets it if the input of the YCbCr(4:4:4) input video image signal is performed.
Sets it if the input of the YCbCr(4:2:2) input video image signal is performed.
It is set when the RGB video signals input is performed.
Configured communication of the HDMI equipment control
Settings: On, Off
Explanation, operation, precautions, settings
The picture position of Tracking and Phase are automatically adjusted.
Adjusts the size and display of the horizontal direction and display area of the video
images.
(Depending on the signal, there is normally no need to be adjusted.)
Adjusts the flickering and blur of the video images.
(Depending on the signal, there is normally no need to adjustment.)
Adjust the display of the picture position.
Adjusts the horiz. of the video image.
Adjusts the vertical position of the image.
[Auto]
[Off]
PC
Auto Alignment
Tracking
880
Phase
16
Picture Position