Before FI Rst Use; Charging The Appliance; Assembly/Disassembly; Connecting The Hand Element To The Handle/Removal From Handle - Silvercrest SHSS 12 B2 Instrucciones De Uso

Before fi rst use
NOTE
► This appliance is supplied with non-charged
batteries. The batteries must be charged for
6 hours before the fi rst use.
■ Remove all packaging materials as well as foils
and stickers

Charging the appliance

GB
NOTE
MT
► Ensure that the appliance is switched off
before starting to charge the batteries.
To charge the appliance, connect the charger i
■
to a mains socket and insert the barrel jack o
into the charging socket s on the cradle d.
Feed the cable through the cable channel on the
charging socket s, so that the cradle d is not
resting on the cable.
■ Place the handle with the attached hand element
4 onto the cradle d.
The red control lamp 3 illuminates.
When the appliance is fully charged, the indicator
light 3 illuminates green.
36

Assembly/disassembly

Connecting the hand element to the
handle/removal from handle
Fig. 1
To connect the hand element 4 to the handle,
■
push the tip of the hand element 4 into the
opening in the hand element recess e.
Then press the grip 1 of the hand element 4
■
into the handle so that the hand element 4
clicks fi rmly into position (Fig. 1).
To remove the hand element 4 from the handle,
■
press the "Hand element" release w.
Then pull the hand element 4 upwards and
■
forwards out of the hand element recess e
(Fig. 2).
Fig. 2
SHSS 12 B2